The temperature of liquids transferred by type SA(SAM\SAF\SAP\SLA) water pumps range from-20 Deg C--80 Deg C and they are suitable for drainage project and feed pump in factory, city mine, power station, field irrigation and water.
Type SA is used to transfer clean water or other liquids physically or chemically similar to clean water.
Type SAM is used to transfer corrosive liquids with solid particles
Type SAF is used to transfer kinds of corrosive liquids.
Type SAP is researched and developed on the basis of type SA and absorbed the advanced technology of domestic and foreign similar products
Performance range: Capacity: 72--9900 m3/h
All the data of pumps can be changed according to requirements of clients.
Construction: The water pump is horizontally installed. The inlet and outlet are under the split surface and in the perpendicular direction with pump central shaft-line, during the course during the course of installation, you needn't to remove the motor and the pipes.
Type SLA is vertically installed, the inlet and outlet at a same center line and the case and cover are in the perpendicular direction.
Bearing: Both end of the pump are rolling bearings(type 24SA_18, 16SA_90 could use the sleeve bearings)to support the rotor, the lubrication oil is dilute oil or grease.
Materials of tolerance: The material s of tolerance is cast iron or it can be changed into cast steel and bronze, but it should be signed in the order.
10_the number obtained from the inlet dia. Divided by 25(the inlet dia. Is 250mm)
SA_single stage double suction centrifugal clean water pump
SAP_changed from type SA
SAM_abrasive single stage double suction centrifugal pump
SAF_anti-corrosive single stage double suction centrifugal pump
SLA_vertical single stage double suction centrifugal pump
6_the number obtained from the specific speed divided by 25
A_the impeller first cut